Marlin Firearms Forum banner

PRICE CHECK ON 375

4.7K views 38 replies 25 participants last post by  brownxane46  
#1 ·
Have a chance at a Marlin in 375 made in 80 condition is very very good no scratches in wood or bluing and bore looks as new. Seller is asking 1,200 and will come with 2 boxs of factory ammo just wanted to here some thoughts from some of the 375 guys as this would be my first marlin in this cal thanks.
 
#3 · (Edited)
Just checking GB, only 2, one has a starting bid of $1100, the other has 3 bids and is at $1300.
So my guess is it about a fair price, especially with the ammo.
And I've seen some brass just a month back, and bet there is still some there. ;)

Image



RP
 
#4 ·
Agree with my brothers above that the deal is fair. And don’t worry about finding brass or ammo, the gun is the hardest part. And we want pictures and a range report.
 
#6 ·
Sounds fair and you won't regret it, if you handload. I have two 375s and a 38-55 that was rebored by JES with a 375 reamer and will shoot 38-55 or 375. They are easy to handload and as phw said they put a smack down on critters. If you can get brass buy up a bunch. You can get bullets, I have a lot but when my supple dwindles I will try some from Hawk Bullets.
 
#7 ·
Steep cost but as stated relatively current with the times. You could always rebore to .375. But, if it is an original Marlin in the caliber they are fairly rare specimens. If you reload, and it is worth the cost to you, go for it. If you don’t reload, get ready to spend the cost of the gun over its lifetime just in here and there shooting.
 
#8 ·
Price is about right for the times. I paid the same for my 1980 production 375. If you want to shoot it much though, it is a reloading affair. Starline makes brass and it's relatively cheap. I have the Marlin and a Winchester Big Bore. I reload and cast my own bullets. I do have some of the now discontinued 220gr Hornady flat point bullets but I don't load much jacketed ammo because I don't hunt anymore. Good luck if you decide to buy it. Personally I'd offer him 1k and see if he takes it. You never know, you might get lucky!
 
#15 ·
I look at it this way.... I've paid up a bit for some things I really liked/wanted the last year or two. In the grand scheme of things, when $100 might fill your gas tank, get what you're wanting. It's not likely to get less expensive in this economy.
 
#16 ·
🍻🍻Thank you fellows and the enablers for all the information about the 375. As of saturday i will be the new owner of a 375. paid seller what he was asking now for the cheery on top he also included a new lee die set 60pices of brass 2 box,s of factory ammo 100 200 gr box of bullets and 1lb of reloader 7 what a sweet deal after all thanks again guys
 
#20 ·
Just got rid of my .375 that i paid $575 for a few years back, due to "thinning the herd." Got substantially north of $1000 for it alone. So, for what you got, i think you got a bargain............and i did hard cast bullets for mine with antimony added, they worked fine. And i never heard the first deer complain about being shot with a cast bullet.
 
#22 ·
dch -- At first I thought $1200 was a bit steep, but now that you got all the extra goodies -- bullets, powder, brass, etc -- I'm thinking that you did well. Like the enablers said -- they don't make these any more, they have big Smackdown, and if that is what you really want, then get Froggy and Leap. Life is short, and if you can afford it, then don't obscess over a few dollars.
 
#23 ·
I only regret 1 Marlin I ever bought, it was a 3030 Texan that I traded a 336CS for. The CS was a straight shooter, the Texan couldn’t hit the sky at point blank range. Other than that 1 exception, I’ve never regretted a Marlin I bought but I’ve regretted ones I’ve sold. I still miss my Ruger SBL, I’ll get another but it won’t be THAT one.
 
#30 ·
Amazing! Woke up the other day and found a Marlin 1894 JM(as new), same vintage as yours for equivalent of $1,151 U.S. all in to my door! So I bought it. I now have this Model in 218Bee,357Mag, and now 375Win. Also a waffle top in 35Remington. Strange thing is I am not even sure I like Marlins yet. But I do like unicorns. My Browning 65 with tang sight groups better at 100yds than my scoped Marlin. Likewise my buck horn sight Browning 92 beats my scoped Marlin in 357mag, go figure. Guess I'll find out if my new to me Marlin in 375Win will out shoot my Winchester BB94 . I came to this forum to get info on my 218 Bee and all you folks have done is cost me money!:p

Anybody have any experience shooting cast in this rifle (375 Win)?
 
#32 ·
Looks like You did well. One sold at auction about 2 weeks ago for $1,080 with 100% Blue and Wood in Unfired condition. Mfg date of 1980. It came from a collection. Keep in mind there is a buyers premium and tax involved along with shipping etc....but a nice Gun.

Your price is the ball park of what they are selling for if condition is as you stated The ammo and extras with the deal is a good addition with the price.
 
#33 ·
I own a Marlin 375S and just love it. I Have used it to hunt deer and bear with outstanding success.

Over the years I have loaded and shot hundreds of cast bullets out of my 375 Win. Due to the microgroove rifling, I found my 375 liked over sized cast wheel weight bullets, I have an Accurate Ranch Dog mold I believe which drops 250 grains. I put a gas check on them and they are sized at .381 dia.

I carefully worked up my loads to that size and got amazing accuracy. I never killed anything with that cast bullet in the 375 but I did kill a bear in my old 38-55 Mod 94 SRC with that bullet and it dropped the bear in its tracks.

Good luck and have fun.