Marlin Firearms Forum banner
Status
Not open for further replies.

More Marlin 39A parts

Message
6.7K views 10 replies 6 participants last post by  M1Riflenut  
#1 · (Edited)
$1.00

Check price


For sale are parts for a Marlin 39A.

ALL PRICES ARE SHIPPED.

1- SPF - BBL, 24" marked "Marlin Golden 39A - $170. (excellent condition inside and out)
2- SPF - Magazine tube assy. operates smooth, not bent (includes band and pin) - $115.
3- SPF - Original Marlin scope base w/screws - $28.
4- Finger lever w/screw- $85.
5- Take down thumb screw - $35 ea. (look unused)
6- Forearm tip tenon - $35 ea..
7- Cartridge stop (late) - $35 ea..
8- Hammer, screw and Spring rod - $78.
9- SPF - Rear sight - $25.
10- SPF - Cartridge guide spring and screw - $47 ea..
11- Firing pin - $42 ea..
12- Cartridge stop (early) - $28 ea..
13- Magazine band - $28 ea..
14- Extractor M 39A - $55 ea. - - - Extractor M 39 - $65 ea.
15- Ejector Assy. complete - $75 ea..
16- Breech bolt (stripped) - $100. Breech bolt (complete) - $185
17- Buttstock, forearm, forearm tip (factory sling swivels) $165/all.

ALL PRICES ARE SHIPPED.

Other 39A parts available, inquire via PM please.
Please PM with questions or requests and do not use this thread for discussion. Payment by cash or USPS money order will ship asap. Bank check will delay shipment 10 business days from cashing. I do not have PayPal or any of the modern electronic fund transfer business...
First unconditional " I will take it " followed by a PM to me gets some good 39A parts...
Thanks,
old wound
 
#2 ·
For sale are parts for a Marlin 39A.

ALL PRICES ARE SHIPPED.

1- BBL, 24" marked "Marlin Golden 39A - $170. (excellent condition inside and out)
2- Magazine tube assy. operates smooth, not bent (includes band and pin) - $115.
3- Original Marlin scope base - $28.
4- Finger lever w/screw- $85.
5- Take down thumb screw - $35. (look unused)
6- Forearm tip tenon - $35.
7- Cartridge stop (late) - $35.
8- Hammer, screw and Spring rod - $78.
9- Rear sight - $25.
10- Cartridge guide spring and screw - $47.
11- Firing pin - $42.
12- Cartridge stop (early) - $28.
13- Magazine band - $28.
14- Extractor - $55.
15- Ejector Assy. complete - $75.
16- Breech bolt (stripped) - $100. Breech bolt (complete) - $185
17- Buttstock, forearm, forearm tip (factory sling swivels) $180/all.

ALL PRICES ARE SHIPPED.

Other 39A parts available, inquire via PM please.
Please PM with questions or requests and do not use this thread for discussion. Payment by cash or USPS money order will ship asap. Bank check will delay shipment 10 business days from cashing. I do not have PayPal or any of the modern electronic fund transfer business...
First unconditional " I will take it " followed by a PM to me gets some good 39A parts...
Thanks,
old wound
On 14 it looks like you have 39 and also 39A extractors? Is that the case?
If it is and anyone has a 39 of that vintage you better snatch one up for a spare while you can! Those are really hard to find. Speaking from experience, I had one break on me and it took a long time to find one and bought the two the guy had that were new old stoke he had laying around for a 39 Centennial which is 1970 DOM. The spring extractors are much easier to locate.
 
#3 ·
@old wound, Could you PM me a closeup of #3, the scope base? Also, did this mount on the top of the receiver or on the left side the same way the old peep sights did? If it will work on my 1957 39A, I'd like to have it cause my eyesight needs a bit of help these days. My days of using peep sights are far away in the rearview mirror.
 
  • Like
Reactions: M1Riflenut
Save
#10 ·
I’ll take #9. PM incoming.
 
Save
Status
Not open for further replies.
You have insufficient privileges to reply here.