A very belated welcome from Alabama...

One of our mods may have some left... Send a PM to Dawei...

 

Thanks, I just saw it was my first post but have been a member since 2013 apparently. I must have joined when looking for information when I was refurbishing an old 39a that I received from my other grandfather.

 

Midway USA has them for about 4 bucks. Very easy to replace.

 

Like most places it's listed on thier site but says discontinued and you cannot buy it.

 

They should be produced again when Ruger gets up and running.

 

Rugers are red and white

 

Just a tip on installing a bullseye Steve0 (well maybe two) I've had real good luck placing the bullseye in the freezer for a good while before installing it. It shrinks it down a bit so it goes in easier. AND, where an original has fallen out on mine, I cut the replacement in half (putting the cut edge down of course) and still had half of one for another replacement.

Where I had a someone place a sling mount in my bullseye, it was deeper and took more of the bullseye to fill the hole. Tape over the stock around the hole to do any shaping/sanding of the bullseye. They come flat across the top, and most stocks have a radius there you'll want to match. Okay, I snuck in a third tip for good measure.

Post up a photo of that 35 when you can, we love looking at other rifles!

 

I still have bullseyes, follow instructions here...
• https://www.marlinowners.com/threads/marlin-bullseyes-for-sale.85946/

 

Are the bullseyes still available?
Mark

 

Dawei I am counting out ones as we speak, err type!

 

Does anybody know where I can find a replacement bullseye for my newly acquired 336? I have looked all over the internet and everywhere says that they are discontinued. Are they gone for good with Rugar taking over Marlin?

I just took ownership of my late grandfathers 336 in the 35 caliber flavor with a serial number dating it to 1966. It was in pretty rough shape with some barrel rust and general neglect so I spent the last few evening cleaning it up. The rifle cleaned up surprising great but is missing the bullseye, and I can't seem to find one anywhere. It is the last piece of the puzzle and my OCD is driving my crazy that it is missing.

I have probably a dozen of them left

 

Contact info ....send PM

 

Fleabay used to have a bunch for sale.

 

I'm new to this forum and acquired a 336 jm marlin 30-30. Found out it is missing the bullseye. Would someone here still have some?

 

I still have bullseyes.

 

Awesome! I'll place payment in the mail tomorrow.
Thanks again!

 

Thanks, I will send you the Money tomorrow.

 

It looks like the new bullseye from Ruger is going to be red and white.

 

My first post, cannot private message yet need some bullseye's for my first Marlin. Message me with info on how to get some.

 

My first post, cannot private message yet need some bullseye's for my first Marlin. Message me at (585)747-8178 with info on how to get some.

If ya scroll up, there's a link to get some 👍

 

If somebody could help me out here, I apparently don't have permissions to open up the link to access Dawei's post for bullseyes either.

Can somebody help me out with this?

I'm guessing I need more meaningful posts.

Thanks in advance!

 

Sorry,just thought I’d help,the old black and whites are available from various sources and probably will be for awhile,but I’m sure you found that out also. Happy New Year

 

I'm hoping Ruger will produce the old style bullseyes as well as parts for older Marlins, that remains to be seen, otherwise we will all be on scavenger hunts eventually.

 

I can't get the link to buy the bullseyes to allow me to continue. It says I don't have permission.

 

Dawei replied to me that they were all gone.

He must have removed the post. I was having the same problem...

 

I guess I'l just have to watch mine for getting loose. I've had two fall out, but I was able to find them. I was going to buy one to keep just in case.

 

Just looked on flea bay, someone has them for sale. Made on a 3d printer. Not cheap tho.....

 

Two for $15.00. That doesn’t sound that bad to me if you need one.


Sent from my iPhone using Tapatalk

 

I saw those too. not so sure…

 

I'm in need of some bullseyes and can't get the above link to work. Also looking for the early style round site hood for my 336 A
Thanks

 

Bullseyes are sold out!