Marlin Firearms Forum banner
Status
Not open for further replies.

Various Marlin Lever gun parts for sale.

6.3K views 64 replies 22 participants last post by  jorgy  
#1 · (Edited)
I have several Marlin lever action parts that I am going to be listing that I will not be using. I will try to list them as accurate as possible. Prices do not include shipping. I can only accept a USPS money order or certified cashiers check.

I have a trade list. It will be updated from time to time. Please see post #36 on page #4

For all items offered: The first to post "I'll take it" is the winning buyer.

Marlin 1888 bare receiver. No visible serial number. There are scratches, nicks, and scrapes on it but no serious pitting. $50


Marlin Model 1893 serial number 223621. Dark greyish brownish color. Might have some very light pitting but nothing you can feel. Inside of the receiver is a little dirty and needs a good scrubbing but is in good condition. Rear tang is marked Model 1893 and top is marked Marlin Safety. $100


Marlin model 1893 .410 receiver and barrel. Receiver has trigger, trigger spring, lever, carrier, lower tang, and hammer. No screws come with it though. Serial number on receiver is 1025 and lower tang is 390355? but it's a little hard to tell exactly because of the way the numbers were struck. Receiver is partly a dull silver with some dark brownish and greyish color is spots. This is what appears to be some light surface rust or could be grime on the left side but I think it would clean up nicely. The barrel is a smoothbore unmarked 22 inch and has a good blued finish on the out side and a very shiny bright bore that looks almost perfect. No sight on the barrel. Sell this as a set and I will not split it up. Asking $250.


 
Save
#2 · (Edited)
Marlin Model 1889 Receiver. This is some pitting around the breech bolt opening at the front by where the barrel screws into the receiver but it should be able to be cleaned up. Serial number is 55992 and both the receiver and lower tang numbers match. It also comes with the trigger, trigger spring, and lever. There are no screws with it. Color is a dark greyish, brownish color. Asking $100.

For all items offered: The first to post "I'll take it" is the winning buyer.




Marlin model 1893 bare receiver. Tang marked Model 1893 and top Marked Marlin Safety. Dark brownish color and in really good condition. Might have some very light pitting but nothing that will prevent it from being the base for a build. Serial number is hard to read but I think it is 449889. Asking $100.



This is a Marlin Model 1881 large receiver parts lot. The receiver is in very good condition and is a dark brownish color with no rust or pitting on it anywhere that I can find. Serial number is 599. The lower tang is in just as good of condition and the receiver and the serial number is 5765 on it. It has the trigger and trigger spring as well. There are also 2 levers. 2 carrier blocks, a main spring, hammer, and bolt all of which are in good condition as well. There are 3 different mortise covers but I do not know what caliber they are for and one of them looks pretty rough. Will not split this up. Asking $250. SOLD and shipped to ROCK
 
Save
#3 · (Edited)
These are all Marlin Model 336 levers and 2 Model 336 lower tangs. They are all in very good condition. I am asking $25 for each lever and the lower tang without lever and $40 for the lower tang with lever. The colors do not match on these two. Picture will be edited as things are sold showing current items I still have.
**One straight blued lever SOLD and shipped to kraynky**
**One straight blued lever SOLD and shipped to rotted54**
**Last straight lever SOLD and shipped to ere**
**Curved lever with lower tang SOLD and shipped to ericboj**
**One square straight lever and polished straight round lever SOLD and shipped to GrumpyBear**


All items listed as sold have been paid for and shipped to the buyers. as of 8/23/15. Thanks guys.

For all items offered: The first to post "I'll take it" is the winning buyer.



Model 336 carrier block pictured is cracked and no longer available.
Model 336 rigger-$25.
Model 336 ejectors-$10 each. **One ejector SOLD and shipped to GrumpyBear**
Model 336 .30-30 bolts-$60 each. There are only 3 available. The fourth one in the picture is damaged and not for sale.


Marlin 444 carrier- **SOLD and shipped to bikerbean**


Model 36 carriers-$40 each.


This is an odd ball part. Marlin Model 60 bolt with charging handle. Don't know much about this and I don't know if it is complete or not. $25
 
Save
#7 ·
These are all Marlin Model 336 levers and 2 Model 336 lower tangs. They are all in very good condition. I am asking $25 for each lever and the lower tang without lever and $40 for the lower tang with lever. The colors do not match on these two.

For all items offered: The first to post "I'll take it" is the winning buyer.
/QUOTE]

I'll take a blued Straight Lever for a 336 for $25 please. You pick it out cleanshot.
 
  • Like
Reactions: JACKTW
Save
#4 · (Edited)
Model 336 Ramline synthetic stock set**SOLD and shipped to turbobug**


Model 336 Checkered stock set in very nice condition. No cracks and a nice semi dark shinny finish. No butt plate included. Asking $175 for the set. SOLD and Paid for by GUNSMITH44


Model 30A, 36 or 336 stock set? Has some dents and scratches here and there but no cracks. No but plate included. Asking $100 for the set. SOLD


Not sure what model this is for. There are no cracks in it but it is scratched, dented, and chipped. Asking $50 for the set. SOLD and Paid for by GUNSMITH44
 

Attachments

  • Like
Reactions: FNQBunyip
Save
#5 ·
PM sent

Jack
 
Save
#8 ·
I'll take it.

This is a Marlin Model 1881 large receiver parts lot. The receiver is in very good condition and is a dark brownish color with no rust or pitting on it anywhere that I can find. Serial number is 599. The lower tang is in just as good of condition and the receiver and the serial number is 5765 on it. It has the trigger and trigger spring as well. There are also 2 levers. 2 carrier blocks, a main spring, hammer, and bolt all of which are in good condition as well. There are 3 different mortise covers but I do not know what caliber they are for and one of them looks pretty rough. Will not split this up. Asking $250.
 
#9 ·
1881 large receiver parts lot - SOLD pending funds to Rock.

On Model 336 straight blued lever - Sold pending funds to kraynky
 
Save
#16 · (Edited)
Is the 336 curved/pistol grip lever w/trigger plate still available? The one which looks to have a squared end lever.
 
  • Like
Reactions: JACKTW
Save
#17 · (Edited)
Is the 336 curved/pistol grip lever w/trigger plate still available? The one which looks to have a squared end lever.
Folks, when posting regarding an items availability, should you wish to buy it then I'll offer an alternative way to pose the question.

If the 336 curved/pistol grip lever w/trigger plate still available; I'll take it. It's the one which looks to have a squared end lever.

Stating it as such establishes you as the winning buyer.

Jack
 
Save
#18 ·
If the 336 curved/pistol grip lever w/trigger plate still available; I'll take it. It's the one which looks to have a squared end lever.

I'll take it, if it is still available.
 
  • Like
Reactions: JACKTW
Save
#20 ·
cleanshot a personnel message is inbound.
 
Save
#22 · (Edited)
444 carrier sold to bikerbean payment received.

As a quick note I'll be out of town for the weekend but will try to check on this as much as I can and I will get back with anyone as time allows.
 
  • Like
Reactions: JACKTW
Save
#25 ·
444 carrier sold and paid for by bikerbean
Last 336 round straight lever sold and paid for by ere

Both of these well ship out Monday.
 
Save
#26 ·
Curved 336 lever and trigger plate assembly sold and paid fir by ericboj.

All items paid for will ship out tomorrow afternoon with tracking info.
 
Save
#30 ·
If there is a straight, squared, blued 336 lever left, I'll take it. If no squared one is left, I'll take a straight, rounded, blued 336 lever. PM sent as well.
 
Save
#32 ·
Cleanshot : I will take a squared lever and a round lever and an ejector if available.

PM sent.
 
  • Like
Reactions: cleanshot
Save
Status
Not open for further replies.
You have insufficient privileges to reply here.