Marlin Firearms Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter · #1 ·
I received a Western Auto model 49 in 22 cal. The trigger group is in pieces and I have no idea how to get it back together. I found a schematic that shows an exploded view but not how to reassemble.

Can anybody help me with reassembly? All the pieces are there according to the schematic I looked at. Thank you.
 

·
Administrator
Joined
·
23,793 Posts
Sounds like a good time to excercise your ability at putting a puzzle together.

Most schematics are exploded with parts in relative position make several copies of the schematic and draw lines from the respective parts to the area it should fit. Start with pins they are the easiest to locate.

Knowing a trigger has to have a pressure or return spring keep that in mind when putting it together.

I would get a few friends over and see how easy it might go with a little help after you'll know a lot more about it and be able to clean it up.

Bottom line when in doubt take it to a smith.
 

·
Registered
Joined
·
18 Posts
Discussion Starter · #3 ·
I got it put together. First time is always a killer. I could do it again now in a few minutes. Thanks.
 
1 - 3 of 3 Posts
Top