Marlin Firearms Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
37 Posts
Discussion Starter · #1 ·
I have an 1894c and would like to add the new tactical sites. Are they easy to install?
Alsi can I use my front sites or should I replace those too. And if so how's the installation on those
 

·
Vendor
Joined
·
1,941 Posts
Hello Clayton,

The 94 tactical is pretty easy to install. Remove the aperture, use the two supplied screws to mount the sight to the rear two sight mounting holes on top of the receiver, adjust windage, adjust elevation, replace the aperture.

Front sights are always a "maybe" I shot a Guide gun with a tactical today and it was on with the factory supplied front sight.

Front sight installation is pretty straight forward. We leave the dovetail a few thousandths oversize to accomodate some of the larger dovetails encountered. Using a triangular file remove some metal off one slope of the sight dovetail till the sight just starts into the slot. Press or tap into place with a brass punch or wood / plastic dowel.

Let me know if I can be of more help.

Thanks Clayton,

ANDY
 
1 - 2 of 2 Posts
Top