Marlin Firearms Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
Hello
My name is Per Lidman and i am from Sweden.I have bougt Noslers 300gr to my Marlin 1895GS and i wounder if somewone can help me with
some loads for that bullet.I have access to Hogdons powder.

Regardes/Per Lidman
 

·
Registered
Joined
·
192 Posts
Lidman,

300 grain Nosler Partition
Starline Brass-unfired, sized with RCBS dies
Crimped with Lee Factory Crimp Die
H4198 powder

1800 feet per second/548.64 meters per second
46 grains H4198
CCI250 Large Rifle Magnum primers

2170 feet per second/661.416 meters per second
54 grains H4198
CCI200 Large Rifle primers

Both loads shoot 1.25" (3.18 cm) groups and 100 yards (91.44 m). I shoot a guide gun with a 16" (.406 m) barrel without ports. I used a chronograph to check velocities. The velocities don't change much between 35 degrees F and 85 degrees F.
 

·
Registered
Joined
·
2,351 Posts
How flat shooting is that 2170 load direwolf??? What do you site in at??? Hit out to 200???
 

·
Registered
Joined
·
192 Posts
Seabass,

I've only fired this load out to 100 yards. The following comes from the Point Blank ballistics program.

50 yards +1.11"
100 yards +1.52"
138 yards zero
150 yards -0.84"
200 yards -6.36"
 
1 - 4 of 4 Posts
Top