Hi all, I just won an auction on a great condition 1894 cowboy competition 38 Spl.
I've never owned a Marlin, and this is my first center fire lever action.
It will mostly serve plinking duty at the range.
Question is what factory ammo do you guys run through these guns? I currently do not reload (I might at some point).
I ordered some Winchester white box target loads. They are FMJ. These were in stock and a good price, so I ordered them.
Is it basically true that all 38 Spl rounds are flat nosed? From the pictures I've seen of the FMJ Winchesters, they have a flat nose. Concern for this is for the tubular magazine.
Any help is appreciated. I'll get some pictures up when I get the rifle in my hands.
There is plenty of weather related shipping delays these days. I've been patiently waiting for 3 deliveries by 3 different companies. Where those delivery dates have been pushed back a couple of times to "new" estimated delivery dates after they've already shipped. Sure, it's a little frustrating, but thats what we have to deal with these days.
Call PSA to confirm your order. Especially, if they have already charged you. It's not unreasonable to request to ask, what's going on with your order.
Congrats on your rifle and welcome to our forum. This is what you need for your new Marlin. Round nose FLAT point ammo. Round nose isn’t made for tubular mags, ok for revolvers but you would be safe loading 2 rounds at a time. Black Hills is the best stuff out there but there are others. Won these at a big cas match but I build my own .38s. Good shooting
No issues I see a lot of reports or using lead round nose on line as well. I could see an issue with a round metal jacket, but don't believe LRN would be an issue?
Welcome to MO from Midcoast Maine. I use round nose and flat nose in my 1894's. You do not want anything with a point. You would be very hard pressed to set off a primer with a round nose. The Hornady LeverEvolution ammo uses a plastic pointed tip and that is ok.
Gorgeous rifle, welcome to the lever addiction ! The forward movement you’re referring to is just good ol’ Marlin Trigger Flop, It’s a thing, just go with it. It doesn’t affect function or accuracy, if you reeeaaaallly can’t stand it, RPP has a trigger kit that will eliminate it. If it was mine, I’d pull that safety, put a saddle ring delete on it yesterday. Enjoy your new toy !
Welcome and congratulations on your lovely lever gun!
If I may suggest, you will find that shooting factory ammunition becomes quite limiting. As others have mentioned, or at least alluded to, reloading for the .38SPL is dead easy and very satisfying. Because it's a straight-wall case it's really one of the easiest cartridges to reload. Plus you can load it up for "big bang" fun, or load it down for pussycat shooting characteristics.
I personally don't own or shoot a .38SPL rifle but you can bet your bottom dollar I'm trying to find one! I shoot a lot of .38SPL in pistols, mostly revolvers but have had S&W Model 52 autoloaders, too. The .38 is a truly versatile cartridge. And it's very inexpensive to reload.
I find that 158grain bullets work well in "target" loads, around 2.8-3.0 grains of W231 powder. One can shoot these all day and not tire of the recoil or muzzle blast.
Getting started in reloading doesn't have to cost a fortune. Lee dies work just fine, and get their factory crimp die as it will help smooth out any bulges in the case at the base of the bullet. It doesn't matter what press you use, .38 just doesn't stress the press at all. Look for good used loading equipment and you'll get started for little cash. The advantages in reloading for the .38 are many, the disadvantages too few to note.
Have a hoot with that new rifle. We want to read a range report!!!!
Welcome and congratulations on your lovely lever gun!
If I may suggest, you will find that shooting factory ammunition becomes quite limiting. As others have mentioned, or at least alluded to, reloading for the .38SPL is dead easy and very satisfying. Because it's a straight-wall case it's really one of the easiest cartridges to reload. Plus you can load it up for "big bang" fun, or load it down for pussycat shooting characteristics.
I personally don't own or shoot a .38SPL rifle but you can bet your bottom dollar I'm trying to find one! I shoot a lot of .38SPL in pistols, mostly revolvers but have had S&W Model 52 autoloaders, too. The .38 is a truly versatile cartridge. And it's very inexpensive to reload.
I find that 158grain bullets work well in "target" loads, around 2.8-3.0 grains of W231 powder. One can shoot these all day and not tire of the recoil or muzzle blast.
Getting started in reloading doesn't have to cost a fortune. Lee dies work just fine, and get their factory crimp die as it will help smooth out any bulges in the case at the base of the bullet. It doesn't matter what press you use, .38 just doesn't stress the press at all. Look for good used loading equipment and you'll get started for little cash. The advantages in reloading for the .38 are many, the disadvantages too few to note.
Have a hoot with that new rifle. We want to read a range report!!!!
@DOGMAN you should be able to shoot +P loads. The same action is used for 357 mags, 44 mags, and 45 Colts. Somebody else can chime in but I believe the only difference between the OP is gun and a 1894C is that the chamber is cut for 38 specials versus 357 mags.
I am not sure why somebody would want to shoot the pricier + P loads out of a Cowboy. 1894s are such a joy to shoot.
Great rifle you have purchased and welcome. The performance of light loads from a rifle is going to be a pleasant surprise. I feel that you will probably gravitate towards a cast bullet light handload that functions well as to cycling through your rifle and feel that you will be very happy with accuracy and performance of target pistol style 38spl loads. With cast bullets round nose are completely safe for the tube magazine and may feed much better through the magazine. As an example when I started shooting lever action rifle silhouette, many people were using 38/357 in pistol cartridge and some used the 22mag. The 32-20 is considered ideal for this game but whether I just have to do different, I wanted something in between. I use the .32s&w long, and feel that it is accurate and perfect power level. The light loaded 38spcl is just right and in the rifle barrel performance is amplified way over revolver performance.
Sent from my SM-S906U using Tapatalk
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Marlin Firearms Forum
4M posts
99.4K members
Since 2004
MarlinOwners.com is a community of Marlin Firearm Owners - Dedicated to discussing Marlin Firearms, Marlin Rifles and more. Pictures, help, discussions and more.