Marlin Firearms Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
39 Posts
Discussion Starter · #1 ·
Hi
I put up a similar new member post but it dissapered in a system crash.
35's are like rocking horse s**t over here and the predominant powder is
made by ADI in Oz. (They also make for Hodgdon. Varget etc)
I have ordered some 200gr coreloct to try and was wondering if anyone has some Hodgdon loads for them.

Also I had some pm's that I couldn't access and have now gone

regards


Nick
 

·
Registered
Joined
·
25,048 Posts
Glad you made it back.. can't help with you question but sure someone will soon..
 

·
Premium Member
Joined
·
3,589 Posts
Hodgdon's Manual for 35 Remmington ****Max Load****

24" Barrel, Rem case, R9.5 primer, 2002 version

BW 180 GRN, FN, OAL 2.47
H4895 39.0, vel 2232, 33,100 cup,
H4198 32.0, vel 2172, 33,000 cup,

BW 200 Grn, RN, OAL 2.510
H4895 38.5, vel 2110, 32,200 cup,
H4198 30.5, vel 1999, 31,700 cup.
 

·
Super Moderator
Joined
·
5,565 Posts
39 grains H335, 2100-2130 fps.

For 2200 fps in a 20" barrel, try 40.5 grains H4895 behind the 200 Core-Lokt.

The Core-Lokt is the best of the 200 RN's in terminal performance.

Congratulations once again on purchasing a .35 Marlin!
 

·
Registered
Joined
·
48 Posts
Welcome to the forum Nick.I'm still looking for a nice .35. :wink:
 

·
Premium Member
Joined
·
3,589 Posts
nickabes do a search, top of the page under the Forums buttons, 35 Remmington has done some very good load research on the 35's and posted his results. It is a very good reference for a new 35 shooter.
 

·
Premium Member
Joined
·
18,030 Posts
My 336C dotes on the 200 Core-Lokt over 39.5 Varget, Federal primers, Lee Collet dies. I normally shoot at 50 yards, but the groups are AMAZING. When the wind stops howling, I need to shoot this load at 100. Even with my crummy eyesight, I expect groups under an inch, with a 4X scope. Any bigger than that, and it's MY fault, not the gun or ammo.

Papajohn
 
1 - 7 of 7 Posts
Top