Marlin Firearms Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
11,573 Posts
Bought a set of rcbs dies. There's only two in the pack. Don't most come with 3? There isn't a die for powder or neck expanding is that normal?
Most rifle die sets come as 2 dies, 1-full length case resizing die,, 2-bullet seating die.. I also have the RCBS 308MX die set, & I purchased a Lee Factory Crimp Die for crimping my reloads as the Lee does a better job. & for my bolt guns, I purchased the RCBS "Neck Sizer" dies, as they do not have to be full length resized as much as Auto or Lever guns.
 

·
Registered
Joined
·
831 Posts
You'll have to chamfer the inside of the case mouth before seating bullets. This serves the same purpose as belling the case mouth on straight wall rifle or pistol brass. You only have to do this once for fired or new brass.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top