Marlin Firearms Forum banner

1 - 5 of 5 Posts

·
Premium Member
Joined
·
13,380 Posts
Discussion Starter #1
Hello everybody:

This is the subject that brought me to MO in the first place. After a very disappointing experience with Bob's Gun Parts, $32 to the drain and three months, the issue remains unsolved.
I need an extractor ejector with spring for a 1905-1915 Marlin Model 94. Thanks to another thread here, I found Numrich Gun Parts. They have the parts I need, but for an "1894 early model". Would they fit the 94?

Thanks in advance for your assistance,

Andrés
 

·
Premium Member
Joined
·
13,380 Posts
Discussion Starter #3
Re: Extractor for Old Model 94

Thanks a lot Willy.

What's the difference between an extractor and an ejector?

Andrés
 

·
Premium Member
Joined
·
2,537 Posts
Re: Extractor for Old Model 94

The extractor is the part that fits over the brass rim and pulls the brass from the chamber. The ejector is the part that forces the brass away from the bolt face and out the ejection port. Most ejectors are in a slot in the left hand side wall, most extractors are on the bolt. Shenandoah
 

·
Premium Member
Joined
·
13,380 Posts
Discussion Starter #5
Re: Extractor for Old Model 94

Thank you Shenandoah, I thought I was making a mistake, now I'm sure. What I need is the ejector and spring.^
Sorry about that,

Andrés
 
1 - 5 of 5 Posts
Top