Marlin Firearms Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
31 Posts
Discussion Starter #1
Really weird I can figure out why this is happening on my 444S. It's almost always on the 1st round coming out of the tube mag. I'll fire, work the action and on the upswing of the lever it jams about half way. I cleaned the action out thoughly, but still it jams kinda lost right now. Right at the spot it jams I'll stop and try and throw it back down on a little. When I do this I'll through it back up again and the action cycles normally then. Nothing is broken either. Any ideas from the more knowledgable members??:hmmmm:
 

·
Contributing Member
Joined
·
11,645 Posts
Click the link in my signature for the Gunsmithing Forum and Reference Library. There's an entire section dedicated to jams. Go through those threads and see if any of your symptoms match up to what you find there.

It could be a few things such as the extractor claw, carrier timing, hanging mag tube follower, etc. Not likely anything too hard to correct once it is sorted out though. :)
 
1 - 3 of 3 Posts
Top