Marlin Firearms Forum banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
25,054 Posts
Discussion Starter #1
This is a copy /paste from a post our great member Tomray posted in response to a question.. It's being made a sticky with no response added to it.. ..\\\


Quote.. TOMRAY...

"Back to the original question.............What I'd look for in a used Marlin............

First, Year of manufacture doesn't matter to me.......I gonna check out the whole gun.
Things I'll check:

Condition of the Bore: ......., Ask for a bore light.....should be rust and pit free, but a few pits won't hurt accuracy in my opinion, in a hunting rifle.........Although pits in the bore at the muzzle can be troublesome........Check the crown for damage and dents too.........

Over all condition: ...........Has the rifle been mis-treated?........... Neglected?.........I'll buy a well used rifle, but not a mis-treated / neglected one............There are too many others out there to choose from......A little light rust can usually be removed with oil and 0000 steel wool when no pits are present.

Stocks: ...........Are they tight?....... do they match?............do they fit the metal well?.........Does the butt plate and grip cap fit right?.....Original finish?.......Check for evidence of cracks and/or repairs.

Bluing: ............This is purely subjective........"Beauty is in the eye of the beholder".....a well worn blue finish shows patina, and would not stop me from wanting to own the rifle.

Action: ......Is it smooth? .....or hitchy?..........Does the lever latch, and unlatch as it should?

Trigger: ..........Is it smooth?.........Have excessive Creep?..........Show signs for someone tinkering with it?............Is the trigger Original?......I wouldn't buy a Marlin rifle with an "after market" trigger..........And Yeah, I mean Happy trigger here........I'd toss it for original parts and then tune those parts.....but thats just me.....

Main Spring: ......Does it feel "FullPower"?............Or show signs of being shortened to reduce power, and as some think, "Enhance" the trigger?

Screws............Do the screw head slots show signs of being buggered up?.........Are all the filler screws present?....Any action screws missing?

Sights..............Are they both present and complete with front hood?..........Do they look original?...Are they both tight?

The Carrier:.........With the action closed, see that the carrier "tail" is free to move in the opening of the TGP. Open the action, and see that the carrier lifts to the loading position correctly....... NOW, watch the carrier as you slowly close the lever. The carrier should be supported by the follower in the high position until the bolt has moved about a 1/4 of its travel. If this is not the case, ther rifle likely has "Last shot loading problems, and needs attention in the carrier/follower area.

These are things I look at.............If all these things pass muster with me, I'm likely to want to buy the rifle if the price is agreeable.......

You will likely find small issues with all used hunting rifles........Only you can decide if they are O.K as is, or will need correction, and can you correct them easily for little or no additional $$."


Tom
NRA LIFE
 

·
Premium Member
Joined
·
10,693 Posts
1 - 2 of 2 Posts
Status
Not open for further replies.
Top