Marlin Firearms Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
8,705 Posts
Discussion Starter · #1 ·
Thought I would post this here because I see this come up so often and the fix is so easy. Its (usually) just the stiff extractor causing feeding issues.
The fix is in the gunsmithing section under Jams of all kinds, but it should be stickied in the 45-70 forum!
I created this fix after loading some dummy rounds setting the gun in a cradle and working the action to see what was going on.
Anyway heres my fix! Feeding Issues- Round entering bore at steep angle and jamming | Marlin Firearms Forum (marlinowners.com)
 
1 - 1 of 1 Posts
Top