Marlin Firearms Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
528 Posts
Discussion Starter · #1 ·
I have finially got one.I took it to the range last week,action works smooth as silk until I cycle shells though it.Then it seems stiff,almost jams up with each cycle.I cleaned and reoiled everything,still the same.Its a real labor to get the shells into the chamber.Any ideas or suggestions.
 
G

·
I have one I bought used , and I've not noticed a problem :shock: But then again it's not a rifle I shoot alot :?
 

·
Registered
Joined
·
127 Posts
Try slipping a cartridge directly in the chamber by hand. If it won't go, your chamber probably has a burr. I had a problem with the cartridge guide spring in mine once, and it caused feeding problems. It's item 16 in this schematic:

http://www.e-gunparts.com/productschem.asp?chrMasterModel=082Zz39M

Or not. I hoped some of the gurus around here would lay the right answer on you, or I would posted this yesterday. Good luck
 
1 - 3 of 3 Posts
Top