Marlin Firearms Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 18 Results
  1. Marlin Collectors
    I am looking for a 1939 marlin 39-A bolt. I haven’t had much luck every post I have come across either sold years ago. I would love any help anyone could provide
  2. Rimfires
    Hello everyone. I purchased a 95' Marlin 880ss. I love this rifle. I decided to take it apart and get to know it. I watched another youtuber's video on an 882 model. There is a spinning portion of the bolt, I will call it the bolt head, that houses the firing pin and extractors. For some...
  3. Team Bolt Action Rimfire
    Hello friends, Hoping you can help me with a rimfire bolt action safety question. I am not exactly new to firearms, but it is fair to say that I am pretty new to bolt action rifles. I grew up using my dad's Marlin 39A lever action. Because of the visible thumb hammer, it was possible to easily...
  4. Rimfires
    Evening gents, I`ve been reading threads on this forum for about 5 years now, but haven`t joined until now. I haven`t had a need to, as my XT-22TR rimfire hasn`t had a problem until now. Let me give you some backround. This rifle is my first gun; I`ve had it nigh on 5 years now and have...
  5. Team Bolt Action Rimfire
    Good afternoon gents, I`ve been reading threads on this forum for a while (5-odd years) now, but just joined up today cause I (finally) ran into a problem with my XT rifle after owning it for nigh on 5 years now and putting I don`t know how many rounds through it. Anyway, yesterday I...
  6. Team Bolt Action Rimfire
    Hey all. I am going to pick up a model 80G on Friday and have been searching for some backround on it. (specs and facts and other basic knowledge) but im turning up short. all i have figured so far is that the G model is from 60-65 and was some promotional thing wit the micro vue scope. anyone...
  7. Team .22 Magnum
    883ss 22 Mag Question Hi all! I am new to the forum, but not new to Marlin. I currently own three, but I know that count will grow. Recently (yesterday!) I bought a 883ss 22 mag. I am been wanting this gun for quite a while and the price with the accessories it was touting was a price I was...
  8. Rimfires
    Hi, I'm hoping you can help me with instructions on how to reassemble the bolt of my marlin 81DL. Long story short it is my grandfathers gun and has never been cleaned. I did a thorough cleaning on the gun and removed the bolt. Once the bolt was removed, I went on to remove the tiny screw near...
  9. Rimfires
    I love my XT-17, have fired it several times and never really had an issue but today I cleaned it and took the bolt out. I did not disassemble the bolt, just removed it. I ran a bore snake through the barrel and cleaned up the gun and bolt. I put some oil on the bolt and slid it back in (pretty...
  10. 336
    Good Evening, I'm a new member of this forum and as of Friday a proud owner of a new Marlin 336W. I did my first complete take-down of the rifle to clean off any grease and get some oil on it. When I reassembled the weapon and cycled it a few times and noticed when the bolt is forward and the...
  11. New Member Introductions
    I need a replacement bolt for my Model 20 Glenfield Marlin rifle (with the squirrel). My original bolt handle sheared off my bolt and I do not think it can be repaired. I would appreciate it if anyone has one to let me know, or if you know someone who has one. I live just outside Waco, Texas...
  12. The Marlin XL7/XS7 Boltaction Centerfire Rifles
    Hi all... I only want to share with you my sadness because i have my XS7VH bolt's extractor broken by disgusting steel cases russian wolf 308 ammo... Before you ask me why i used these ammo in this kind of weapon,the gun shop owned only wolf and i had to buy it to denounce 100 308 ammo to my...
  13. New Member Introductions
    Greetings from Ohio. I just bought a Camp 45 at a gun show over the weekend. It's in good shape but I need to replace the bolt assembly. I am aware that Numrich has them but wanted to see if someone had one they want to re-purpose. Let me know if you've got one. Could also use a wood stock...
  14. Rimfires
    First Post here ever... I just purchase a new marlin, my first ever. My grandfather had one and I figured it was time. Bought my new 22xt and brought it home with a box of cci troy landry special edition mini mag .22 lr 36 grain hp's. Unfortunately not more than 20 rounds in the casings...
  15. Rimfires
    Hi all: I've had my XT17 for a month now. Shot about 300 rounds through it was really happy with it, until I noticed a flaw while cleaning it the other night. On the underside of the bolt, there are two groves. In on of the groves is a drilled hole, through which you can see the spring...
  16. Rimfires
    Hi all, It's unfortunate we had to meet under these circumstances, but the bolt of my rifle is jammed closed. Today, during some target practice, I had my first case rupture. The bullet fired, (target still hit too, just quietly) but the case remained in the rifle. I stopped and took it up to...
  17. CAMP CARBINES 9 & 45
    Hello everybody. I new to this site and hopefully somebody here can help me out. I got a camp 9 that needs some work, but when i try to disassemble it, the bolt assembly wont come out. It seems like the extractor/ejector is stuck out like its indicating that there is a round chambered preventing...
1-17 of 18 Results
Top