What RD molds would you like to see available ???????
Page 1 of 5 123 ... LastLast
Results 1 to 10 of 45


  1. #1
    Sidewinder
    Join Date
    Aug 2009
    Posts
    143
    Member #
    11238
    Thanked
    9 times

    What RD molds would you like to see available ???????

    I have been away for a good time and having found out that RD is designing and bringing molds out again, was just wondering what the may be in store for the future.

    I would like to see a mid weight (375-425gr) 45/70.
    and maybe a heavy 45lc (300-350gr)
    and maybe a .357 in the (175-190gr)

    I'm sure something like this has already been done but I wasn't lucky enough to be around when they were.

    What molds would you like to see, list em up!

  2. #2
    Gun Wizard
    Join Date
    Jan 2009
    Location
    Arizona
    Posts
    2,930
    Member #
    8241
    Thanked
    3898 times

    Re: What RD molds would you like to see available ???????

    RD 432-225 GC I think he would have the entire spectrum covered.
    Oh...Give me a home where the buffalo roam and the deer and antelope play.

  3. #3
    Wrangler
    Join Date
    Mar 2010
    Posts
    338
    Member #
    15061
    Thanked
    7 times

    Re: What RD molds would you like to see available ???????


    A TLC460 around 300 grains.

    As democracy is perfected, the office (of President) represents,... the inner soul of the people... On some great and glorious day the plain folks... will reach their heart's desire at last, and the White House will be adorned by a downright moron-Mencken

  4. Remove Advertisements
    MarlinOwners.com
    Advertisements
     

  5. #4
    Tinhorn
    Join Date
    Feb 2008
    Posts
    47
    Member #
    4792
    Thanked
    2 times

    Re: What RD molds would you like to see available ???????

    I second the 432-300-RF and 460-425-RF six cavity!

  6. #5
    Tinhorn
    Join Date
    Aug 2007
    Location
    NW Ohio
    Posts
    61
    Member #
    3808
    Thanked
    2 times

    Re: What RD molds would you like to see available ???????

    .453 260 or so gr GC mould

    I need a GC'ed lighter weight bullet

    John
    only work so I can aford to hunt

  7. #6
    Tenderfoot
    Join Date
    Feb 2010
    Posts
    3
    Member #
    14839

    Re: What RD molds would you like to see available ???????

    Personally I hope RD does a .357 plain base for lever guns that is slightly lighter than the current 359-190. I see no need for the heavier 190 in the 357 for most shooting, and would like to do away with the gas check for the 357. If it was done around 165-175 grains and could double for a heavy 38 special bullet for snubnose 38's, it would be all the better. I use his semi-auto pistol bullets now, but sometimes carry a 38 snubbie, and the 190's don't really fit well for the application. JMO, Billy

  8. #7
    Tenderfoot
    Join Date
    Feb 2010
    Posts
    3
    Member #
    14839

    Re: What RD molds would you like to see available ???????

    And BTW, I am tickled pink about him reopening as there are about 8 molds of his I have in 2 cavity versions that I am looking forward to getting 6 cavity versions of. Can't wait. I also hope RD can squeeze in a run of the 225-57 bullet shown in his project bullet file. I'm sure that will be way down on the list, but I can always hope! Working with the 225-50 right now and am having good results, but would like the heaver one as well as I have some 12" twist guns I think it would be great in.

  9. #8
    Sidewinder
    Join Date
    May 2008
    Location
    Northern Wisconsin
    Posts
    131
    Member #
    5620
    Thanked
    38 times

    Re: What RD molds would you like to see available ???????

    A bullet for the 25-35 would great in the 100gr range.

  10. #9
    Platinum Poster
    Join Date
    Mar 2004
    Location
    State College, Pa
    Posts
    25,055
    Member #
    12
    Thanked
    721 times

    Re: What RD molds would you like to see available ???????

    I don't reload or cast.. but I sure would like to see RD back up and running again ..
    Gunjunkie..

    "Arbitrary power is most easily established on the ruins of liberty abused to licentiousness." --George Washington

  11. #10
    Wrangler
    Join Date
    Jun 2007
    Location
    Central Pa.
    Posts
    391
    Member #
    3608
    Thanked
    81 times

    Re: What RD molds would you like to see available ???????

    I missed out on the 323-170 and the 379-235 molds.I would also like some of the others just because they are in a six cavity mold.I have the 339-200 group buy mold and boy does it put out the bullets in a hurry.I am glad to see RD coming back.I think his products fill a niche in the hunting and shooting sports that is usually ignored by the industry.


Page 1 of 5 123 ... LastLast

Home | Forum | Active Topics | What's New | Subscribed Threads

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Search tags for this page

.357 flat base truncated cone lead projectile mold
,
.38 special dimension
,
.38 special dimensions
,
.38 spl wad cutter cartridges
,
357 180 grain flat nose gas check
,
357 truncated cone gas checked bullet mold
,

38 special cartridge

,
38 special cartridge dimensions
,
45 acp lee 230 truncated cone unique
,
ranch dog mold tlc357-135rf
,

ranchdog what molds would you like

,
rd molds
,
tlc357-135rf
Click on a term to search for related topics.