After searching in vain for weeks - I'm thinking NO ONE sells an extension tube for the 20 ga. Pardner . The Remington ones fit the 12 ga. but not so with the 20 ga.
Can anyone direct me to anywhere I might be able to get one ? Thanks
I'm thinking NO ONE sells an extension tube for the 20 ga. Pardner
Brownells is your friend
159-000-006 20 Ga Blue Mag Ext, 2-Rds fit Remington $45.00
159-000-007 20 Ga Blue Mag Ext, 3-Rds fit Remington $45.00
159-000-008 20 Ga Blue Mag Ext, 4-Rds fit Remington $48.00
159-000-009 20 Ga Blue Mag Ext, 5-Rds fit Remington $51.00
"It's not a sin to get knocked down; it's a sin to stay down"
Master Chief Carl Brashear
I was told the Remington extensions will not work on the 20 ga. Pardner pump ; however they will on the 12 ga. !
If I knew it would only take some modifying -I would get the Rem. one in a heartbeat
I think a big outfit like midway or brownness should be able to tell you with a sumple phone call.
Choate Mag Tube Extension Remington 870 1100 Lightweight 20 Ga 3-Round
You can always order one and see if it can bd modded once it comes in. If not your only out a few bucks to ship it back.
If the 12 gauge fits it is likley the 20 will also but check.
Mike - Choate told me over the phone they have nothing that would work ........
but thats a sound idea to order some and see if they could possibly work
I know this is an old thread but I just wanted to say I installed a choate +2 extension on my pardner pump 20g today.
I bought one to see if it would fit and if not I know a machinist who could copy it for me. Out of the package it would bite the threads but wouldn't go, the inner diameter of the choate is a hair smaller than the outer diameter of the mag tube. I took a grinding stone attachment put it on my drill and just went around the threads of the choate a couple times. I tried attaching again and it would go more down the threads. The more grinding the more it would screw down until finally it locked up on the barrel. This was less than 5 minutes of grind a little check, grind some more check and so on. Holds solid on the gun. I thought along the same lines as Mike did, why would they copy the 12g down to the threads and change the 20g threads.
Pardner Pump Youth 20g 21" barrel
Choate 7 shot for Rem 870 LW 20g